raidcom initialize parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E30 001A Volume Security is set to LDEV.
Get Command
Status
Async 2E30 004E The Data Retention Utility/Volume Retention
Manager attribute of LDEV is enabled.
Get Command
Status
Async 2E30 0061 LDEV is a pool volume and the pool volume include
the Dynamic Provisioning volume that is not in the
blocked status.
Get Command
Status
Async 2E30 0074 LDEV cannot be operated because it is an external
volume mapped for online data migration.
Get Command
Status
Async 2E30 0206 The operation cannot be performed because the
LDEV is a deduplication system data volume.
Get Command
Status
Async 2E31 0001 Maintenance work cannot be performed because
the LDEV is a quorum disk.
CMDRJE
Get Command
Status
Executing
Async
2ECF FEEC An internal error occurred. Call Hitachi Data
Systems customer support.
CMDRJE Executing 2EF3 0102 The specified parameter is invalid. Check the
Command Control Interface Command Reference.
Table 9-148 SSB codes returned by raidcom get parity_grp
raidcom get parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2ECF 00F1 The operation cannot be executed because the
operation is not supported.
Table 9-149 SSB codes returned by raidcom modify parity_grp
raidcom modify parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE
Get Command
Status
Executing/
Async
2E00 0101 The parity group number or the external volume
group number is not within a valid range.
CMDRJE Executing 2E00 0102 The specified group type is not correct.
Get Command
Status
Async 2E10 0103 The specified operation cannot be performed
because the collection copy is in process.
9-184
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
