raidcom modify parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E10 0104 The specified operation cannot be performed
because the dynamic sparing is in process.
Get Command
Status
Async 2E10 0105 The specified operation cannot be performed
because the copy back is in process.
Get Command
Status
Async 2E10 0107 The specified operation cannot be performed
because the collection access is in process.
Get Command
Status
Async 2E10 0108 The specified parity group is a RAID configuration
which cannot be used as the pool vol.
Get Command
Status
Async 2E10 010A The specified operation cannot be performed
because the parity group does not support
accelerated compression.
Get Command
Status
Async 2E10 010B The operation cannot be performed because data
remains in a expanded space of the parity group.
Format parity groups.
Get Command
Status
Async 2E10 010C The specified operation cannot be performed
because the encryption is enabled.
Get Command
Status
Async 2E10 8500 The specified operation cannot be performed
because the drive copy is in process.
Get Command
Status
Async 2E10 8501 The specified operation cannot be performed
because the drive is blocked.
Get Command
Status
Async 2E10 8506 The specified operation cannot be performed
because the drive’s firmware does not support
accelerated compression.
Get Command
Status
Async 2E11 0057 The specified operation cannot be performed
because the LDEV is under format, shredding, or
quick format.
Get Command
Status
Async 2E11 005A The specified operation cannot be performed
because the pool is used as the pool which is full
allocated.
Get Command
Status
Async 2E11 005B The specified operation cannot be performed
because the LDEV in the parity group is dispersed
in several pools.
Get Command
Status
Async 2E11 005C There is a volume which Data Retention Utility is
set in the specified parity group.
Get Command
Status
Async 2E11 005D The specified operation cannot be performed
because the LDEV is created in the expanded
space of the parity group.
Get Command
Status
Async 2E11 005E The specified operation cannot be performed
because the LDEV belongs in the blocked pool.
Get Command
Status
Async 2E11 0208 The operation cannot be performed because the
specified parity group contains an LDEV that is not
a pool volume.
Troubleshooting
9-185
Command Control Interface User and Reference Guide
To Next Page
Loading...
