Hitachi L100 - Page 160

A
A Group standard functions 3–10
AC motor 1–9
AC reactors 5–3
Acceleration 3–9, 3–19
two-stage 4–10
Access levels 2–2
Accessories 5–2
Air flow 2–7
Alarm signal 4–22
Alarm terminals 4–5
Analog I/O terminals 4–5
Analog input operation 4–24
current/voltage select 4–15
Analog input settings 3–11
Analog output operation 4–25
current/voltage select 4–15
Automatic voltage regulation 3–18
AVR function 3–18
B
B Group fine tuning settings 3–21
Base frequency 3–10
Bibliography A–8
Books on variable-frequency drives A–8
Braking 1–10
dynamic 5–5
resistive 1–14
settings 3–15
usage ratio 3–25
C
C Group intelligent terminal functions 3–27
Capacitor life curve 6–10
Carrier frequency 3–25
Choke for DC link 5–4
Connection to PLC 4–4
Constant torque 3–5, 3–10, 3–13
Constant volts/hertz 1–8
Cover removal 2–16
Current monitor signal 4–26
D
D Group monitoring functions 3–8
DC braking 4–9, A–3
DC braking settings 3–15
Deceleration 3–9, 3–19, 3–23, 4–9
two-stage 4–10
Default settings 6–8
Definitions A–2
Derivative gain 3–17
Digital operator panel 1–10
Dimensions 2–8
terminals 2–15
DOP Plus software 1–12
parameter settings B–7
PC software 3–6
Dynamic braking 5–5, A–3
Index