Hitachi L200 Series

Parameter Settings for Keypad Entry
Appendix C
C–4
A032 Multi-speed 12 setting 0.0 0.0
A033 Multi-speed 13 setting 0.0 0.0
A034 Multi-speed 14 setting 0.0 0.0
A035 Multi-speed 15 setting 0.0 0.0
A038 Jog frequency setting 1.00 1.00
A039 Jog stop mode 00 00
A042 Manual torque boost value 5.0 5.0
A242 Manual torque boost value, 2nd
motor
0.0 0.0
A043 Manual torque boost frequency
adjustment
3.0 3.0
A243 Manual torque boost frequency
adjustment, 2nd motor
0.0 0.0
A044 V/f characteristic curve selection 02 02
A244 V/f characteristic curve selection,
2nd motor
02 02
A045 V/f gain setting 100. 100.
A046 iSLV voltage compensation
gain
100 100
A246 iSLV voltage compensation
gain, 2nd motor
100 100
A047 iSLV slip compensation
gain
100 100
A247 iSLV slip compensation
gain, 2nd motor
100 100
A051 DC braking enable 00 00
A052 DC braking frequency setting 0.5 0.5
A053 DC braking wait time 0.0 0.0
A054 DC braking force for deceleration 0 0
A055 DC braking time for deceleration 0.0 0.0
A056 DC braking / edge or level detec-
tion for [DB] input
01 01
A061 Frequency upper limit setting 0.0 0.0
A261 Frequency upper limit setting,
2nd motor
0.0 0.0
“A” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FEF
(EU)
-FU
(USA)