Hitachi L200 Series - DIP Switch Introduction

Removingthehousingcover

There are several ways which depend on the scale of the housing cover.
scale (small) : (200V class ) 0.2kW, 0.4kW, 0.75kW
scale (middle): (200V class ) 1.5kW, 2.2kW, 3.7kW
(400V class ) 0.4kW – 3.7kW


Scale(small)
1.Remove the monitor cover, front cover and rear cover.
When removing the monitor cover, please remove the communication cable
from the front cover side.




2.Insert the minus screw driver between the cooling fin and the housing, and unlock the tabs
(4 points at the left and right side) .



3. Remove the housing.
housing
monitor cover
front cover
rear cover
tab1
tab2
tab3
tab4