EasyManuals Logo

Hitachi LE42EC06AU User Manual

Hitachi LE42EC06AU
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
Troubleshooting
Before calling service personnel, please check the following troubleshooting guide. If any problem still
persists, unplug the TV set and call for servicing.
Symptom Check List
No picture, no sound •Check if the main power of the TV is turned on.
•Check the connection of the power cord and/or other cables.
Normal picture, no sound •Check the volume level.
•Check if the button has been pressed or not.
•Check the connection of the external equipment.
Poor colour or no colour, normal sound •Check the value level of “Brightness”, “Contrast” and
Colour” in Picture menu.
Multiple images, normal sound •Check the antenna connection and direction.
•Fine tuning the TV.
•Check the connection of the external equipment.
•The TV station may have broadcast difficulties. Try another
channel.
Snowy picture, poor sound •Check the antenna connection and direction.
•The TV station may have broadcast difficulties. Try another
channel.
Intermittent interference •Check if the source of interference is shield well.
•Remove those kinds of electrical devices away from the TV.
Poor stereo sound •The TV station may have broadcast difficulties. Try to
change to mono mode.
Remote control does not work •Check if the batteries are installed correctly.
•The batteries may be exhausted. Replace them with new
ones.
•Remove all obstruction between the remote control and the
remote control sensor.
•Ensure there is no strong light shining on the remote control
sensor.
HITACHI logo appears on the screen •The TV cannot detect any signals from any input terminals.
•Check if the cable is connected correctly and firmly.
•Check if the power of any external equipment is turned on.
•Check if the input source selection is correct.
HITACHI logo or “Unsupported Signal
appears on the screen (RGB mode only)
•Check if the display resolution and frequency from your PC
is a valid mode for the TV. Refer to the recommended RGB
input signal chart
Image not centered (RGB mode only) •Adjust the “H Position” and “V Position” in the RGB Mode
Setup menu.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi LE42EC06AU and is the answer not in the manual?

Hitachi LE42EC06AU Specifications

General IconGeneral
BrandHitachi
ModelLE42EC06AU
CategoryLCD TV
LanguageEnglish

Related product manuals