Hitachi PC-ARF1 - 7 Power Saving Guidance

6
P5417005
(1) To set the operation lock, press “ ” and
“Back/Help” simultaneously for three
seconds. The icon “ ” will appear to show
the lock is turned ON. When pressing “ ”
or “ ”, locked setting items will be skipped.
(2) To cancel the operation lock,
press “ ” and “Back/Help” simultaneously
for three seconds. “ ” will be turned OFF,
and the operation lock will be canceled.
7. PowerSavingGuidance
• This function easily sets the power-saving
feature.
• Depending on the type and setting of the indoor
unit and outdoor unit it may be impossible to set
this function.
NOTE:
: Unable to set:
If a function displaying “ ” is selected from the
“Menu”, “No Function” will be displayed on the
lower screen.
(1) Press “ECO”:
The Power Saving Guide will be displayed
as shown in the image near the bottom of
this page.
(2) The current setting status is displayed
for “Power Saving Mode”, “Power Saving
ON/OFF”, “Power Saving Level” and the
schedule. It is possible to change the “Sav
ON/OFF” and “Sav Level” settings. (*1)
• Power Saving ON/OFF Setting:
Press “ ” or “ ” and select “SAV ON/OFF”.
By pressing “ ” or “ ”, the setting will
change between “ON” ↔ “OFF”. (*2)
• Power Saving Level:
Press “ ” or “ ” and select “Sav Level”.
By pressing “ ” or “ ” the setting will change
between “LOW” ↔ “MED” ↔ “HIGH”. (*2) (*3)
• Detailed Setting:
Press “ ” or “ ” and select “Detailed Setting”.
By pressing “OK”, the Detailed Setting
screen will be displayed.
OK
Menu
Back/Help
Power Save Guide
Sav Mode
Capacity Cntl
Sav ON/OFF
ON
Sav Level
HIGH
RtrnSel. Adj.
Back
Schedule
No Setting
Detailed Setting
NOTE:
• Each time when pressing “ ” and “Back/
Help” simultaneously for three seconds,
the operation lock state will be switched
alternately between locked and unlocked.
• Select what is to be locked at the function
selection setting.
Contact your distributor for detailed
information.
OK
ECO
Menu
Back/Help
OK
ECO
Menu
Back/Help
OK
ECO
Menu
Back/Help
OK
ECO
Menu
Back/Help
The icon “Sav : HIG” is
displayed when “Power
Saving” is ON.
OK
Menu
Back/Help
NOTE:
*1: When the Power Saving Mode is “Rotation
Control”, the “Power Saving Level” and
schedule are not displayed.
When the Power Saving Mode is “No
Setting”, the “Power Saving ON/OFF”,
“Power Saving Level” and schedule are not
displayed.
*2: When the Power Saving Mode is “Capacity
Control” and “Main/Sub-Remote” from
Section 9. “Help Menu”, “Current Setting”
is displayed as SUB. It is not possible to
change the settings for “Power Saving ON/
OFF” and “Power Saving Level”.
*3: When Power Saving is OFF, the “Power
Saving Level” cannot be changed.