Hitachi PC-ARF1 - Priority Setting for Operations; Setting Priority for Mode;Temp

20
P5417005
8.8 Quick Function
This function operates for 30 minutes once the
operation starts.
This function is only available when the operation
mode is COOL or HEAT.
The unit will start each time in quick mode until the
setting is canceled.
NOTE:
• Depending on the type and setting of the indoor
unit and outdoor unit it may be impossible to
set this function.
• The “Main/Sub-Remote” is displayed in the
“Current Setting” of the “Help Menu” and
cannot be set if “−−”.
• It is possible that the automatic fan speed will
fall to LOW for a maximum of 30 minutes. The
operation will start regardless of the fan speed
setting of the controller when in cooling mode.
(1) Select “Quick Function” from the “Menu” and
press “OK”.
The “Quick Function” screen will be
displayed.
(2) By pressing “ ” or “ ” the “Quick” mode
will change as follows :
OFF ↔ COOL Only ↔ HEAT Only ↔
COOL + HEAT
Select the “Quick” mode and press “OK”.
(3) The setting conrmation screen will be
displayed. Select “Yes” with “ ” or “ ”
and press “OK” to conrm the setting. The
screen will return to normal mode.
The icon “QUICK” will be displayed when in
“Quick” mode.
Menu
Function 10
Sav/reduction Schedule
Comfort Setting
Quick Function
02
/
05
Operation Noise Reduction
15:10(Fri)
Entr RtrnSel.
Back
OK
Back
OK
Quick Function
Quick
COOL only
Entr RtrnAdj.
Back
OK
Quick Function
Yes No
Sel. Entr Rtrn
Set quick function?
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p