Hitachi PC-ARF1 - Main;Sub Remote Controller

32
P5417005
(4) Press “ ” or “ ” and select setting data.
• If “Temperature Unit” is selected
it will change as follows :
“Degrees C” ↔ “Degrees F”.
• If “Temperature Width” is selected
it will change as follows :
“0.5ºC” ↔ “1ºC”
Press “OK” when all settings are
complete.
When the selected language is English,
Fahrenheit temperature degrees can be
selected.
(5) The setting conrmation screen will display.
Select “Yes” using “ ” or “ ” and press “OK”
to conrm the setting.
The screen will return to the normal mode.
8.17.4 Main/Sub Remote Controller
(1) Select “Screen Display Setting” from the
“Menu” and press “OK”.
This function is used to select Display/Non-display
for “MAIN” or “SUB” displayed on the normal
mode screen.
(2) The “Screen Display Setting” screen will
display. Select “Main/Sub Display” using “ ”
or “ ” and press “OK”.
It cannot be set if only the main controller is
available or when the display for “Main/Sub-
Remote” in the “Current Setting” is shown as
“−−”.
NOTE:
If the unit is set as “Non-display”, it is possible to
verify if the controller is Main/Sub in the “Main/
Sub-Remote” of the “Help Menu” “Current
Setting”.
(3) The “Main/Sub Display” screen displays.
By pressing “ ” or “ ” the setting will
changed as follows :
“Display” ↔ “Non-display”
Select the setting and press “OK”.







Menu
Screen Display Setting
Room Name Registration
Function 19
Daylight Saving Time
04
/
05
Adjusting Date/Time
15:10(Fri)
Entr RtrnSel.
OK
Back
Screen Display Setting
Main/Sub Display
Temperature Unit
Language Setting
Display Adjustment
Entr RtrnSel.
Back
OK






OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Help