Hitachi PC-ARF1 - Page 24

18
P5417005
(2) Select “Detailed Setting” with “ ” or “ ” and
press “OK”.
• When using a main controller, the “Power
Saving Detailed Setting” screen will be
displayed. Refer to (3) below.
• When using a sub controller or if the
indoor unit does not support power saving,
the “Detailed Setting” of the “Intermittent
Control” will be displayed. Refer to (4)
below.
(3) Select “Intermittent Control” with “ ” or “ ”
and press “OK”.
The detailed setting screen of the intermittent
control will be displayed.
(4) By pressing “ ” or “ ”, the following
indications will be displayed :
“LOW→MED→HIGH” ↔ “LOW Only” ↔
“MED Only” ↔ “HIGH Only”.
Press “OK” after selecting a setting.
(5) The setting conrmation screen will be
displayed. Select “Yes” with “ ” or “ ”
and press “OK” to conrm the setting. The
screen will return to normal mode.
If the “Power Saving Setting” setting is
accessible, set it “ON” using “Power Saving
Guidance”.
Back
OK
Detailed Setting
Power Saving Mode Setting
Power Saving Setting
Entr RtrnSel.
Detailed Setting
Intermittent Control
Rotation Control
Capacity Control
Entr RtrnSel.
Back
Detailed Setting of Intermnt Control.
OK
Intermittent Control
Chg level
LOWяMEDяHIGH
Entr RtrnAdj.
Back
OK
Select setting range of
power saving.
Back
OK
Intermittent Control
Yes No
Sel. Entr Rtrn
Fix power saving settings.
Cancel current power saving
settings?
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p
OK
Menu
Back/Hel
p