EasyManua.ls Logo

Hitachi PC-ARFG2-A - 5.5.1 Schedule Day and Time Setup

Hitachi PC-ARFG2-A
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Function Menu Screen Display
A16381TMEU
25
5.5.1 Schedule Day and Time Setting
NOTE:
indicates that schedule control is not possible.
Refer to "6.1 Adjusting Date/Time" to set the date and time.
1. Set the schedule day and time
Step1. Select "Power Saving/Night Quiet Schedule" on the
"Function Menu" screen and press "OK".
If the sub remote controller or indoor unit does not
support power savings, the power saving schedule
setting screen for intermittent control (Step3) is
displayed.
Step2. Press " " or " " to select the setting items, and then
press "OK". The items are changed as follows:
"Capacity Control"
"Intermittent"
"Night Quiet
Operation".
If the current time is not set, the "Adjusting Date/
Time" setting screen is displayed.
If no schedule or holiday has been set, Step4 is
displayed.
Step3. Press " " or " " to select the schedule day and time
settings, and then press "OK".
Step4. Select the day of the week (from Mon. to Sun.) to be set
with " " or " ", and press "OK".
(run) and (stop) is displayed on the LCD.
To copy the setting contents of the previous day, press
" " and "OK" simultaneously.
Step5. Press" " or " " to select schedule timer No. 1 to No.5,
and press " " or " " to select "ON Time"
"OFF Time"
"Level"
" ". By pressing " " or " ", "ON / OFF Time"
and "Level" can be set.
Five different schedule timers (maximum) can be set
for each day of the week.
Press "OK" to display the schedule time setting screen
for the next day of the week.
Select " " and press "OK" to delete the setting of
"ON / OFF Time" and "Level".
Press " " to return to Step4.
Function Menu
Power Saving/Night Quiet Schedule
Power Savings Setting
Night Quiet Operation
Operation Schedule
Simple Timer
BackOK Select
(Mon) 16:30
Power Saving/Night Quiet Schedule
Intermittent Control
Night Quiet Operation
Capacity Control
Set when schedule is used.
* Power Savings mode setting activated too.
BackOK Select
(Mon) 16:30
Intermittent Control
Verify Intermittent Control Schedule
Turn OFF
Schedule
ON
Mon
Tue
Wed
Thu
Fri
Sat
Sun
0 6 12 18
(Mon) 16:30
BackOK Select
Intermittent Control
Mon
Tue
Wed
Thu
Fri
Sat
Sun
0 6 12 18
(Mon) 16:30
BackOK Select
Monday Schedule
ON Time OFF Time Level
08 : 00 10 : 00 LOW~
10 : 00 12 : 00 MED
~
12 : 00 14 : 00 HIGH~
14 : 00 16 : 00~ MED
16 : 00 18 : 00~ LOW
1
2
3
4
5
Press Up and Down to adjust
(Mon) 16:30
Back
26.5
Temp
OFF
Conference Room
Sav:Low | Main
20 C
Out of temp. range
FrostWash stops
AC o in 0.5 hrs
Priority
Cleaning Filter
Indicates that schedule control is in
operation.

Related product manuals