5. Function Menu Screen Display
A16381TMEU
29
5.8 Comfort Setting
This function is used to control discharge or supply air temperature when in the cooling mode.
NOTES:
•
This function cannot be set when the indoor unit does not support this function.
•
The cool air level order is as follows: "High" > "Med" > "Low" and the temperature of the discharged air is
high.
•
•
When this function is set, it may take time for the entire room to cool down.
1. Set the comfort
Step1. Select "Comfort Setting" on the "Function Menu" screen
and press "OK".
Step2. Press " " or " " to select "GentleCool Comfort", and then
press "OK".
•
For other settings, please refer to the Operation Manual
of the indoor unit.
Step3. Press " " or " ", the selected comfort level changes as
follows:
"Not Set"
↔
"Low"
↔
"Med"
↔
"High".
Select the "GentleCool Comfort" during cooling and press
"OK".
Press " " to return to the "Function Menu" screen.
Setback Setting
Comfort Setting
Motion Sensor Setting
Function Menu
Power Consumption Display
Autoboost
OK
Select Back
(Mon) 16:30
OK
Select Back
Comfort Setting
GentleCool Comfort
Louver Direction in Cooling Mode
Louver Direction in Heating Mode
Radiant Sensor Control for Heating
FeetWarm Heat Air Flow
GentleCool Comfort
OK
Select Back
Not Set
Low
Med
High
To Next Page
Loading...
