6. Screen Display Setting
A16381TMEU
43
6. Screen Display Setting
1. Screen display setting
Step1. Select "Screen Display Setting" on the "Menu" screen and
press "OK".
Step2. Press " " or " " to select setting item and press "OK".
Press" " to return to "Menu" screen.
•
If there is no operation on the display setting screen for
about 10 minutes, the screen automatically returns to the
home screen.
•
Various settings are saved even when the power supply is
6.1 Adjusting Date/Time
Function Action
Adjust Date/Time Set Year/Month/Day/Hour/Minute.
Time Format Change the time format to 12 hour/24 hour.
6.1.1 Adjusting Date/Time
•
•
With this controller, the built-in capacitor will allow continued operation for 72 hours. Reset the date and
time if the controller remains without power for longer than 72 hours or the main power supply is OFF for a
long period of time.
•
When adjusting time from the main controller, the sub controller of the same refrigerant cycle will be set at
the same time.
NOTE:
•
main controller will be set at the same time.
(Please check the main and sub display on the home screen. If it is not displayed, check "8. Main
Remote Setting" in the Installation and Maintenance Manual.)
1.
Screen display setting
Step1. Select "Adjusting Date/Time" on the "Screen Display
Setting" screen and press "OK".
Step2. Press " " or " " to select "Adjusting Date/Time" and
press "OK".
Temp
Cool Fan Speed Louver
Service & Installation
Contact Information
Screen Display Setting
Function Menu
Menu
Menu
(Mon) 16:30
Screen Display Setting
Language Setting
Display Adjustment
Temperature
On/Off Indicator Brightness
Adjusting Date/Time
OK
Select Back
(Mon) 16:30
Screen Display Setting
Language Setting
Display Adjustment
Temperature
On/Off Indicator Brightness
Adjusting Date/Time
OK
Select Back
(Mon) 16:30
Adjusting Date/Time
Daylight Savings Time
Adjusting Date/Time
Time Format (AM/PM or 24Hour)
OK
Select Back
(Mon) 16:30
To Next Page
Loading...
