5. Function Menu Screen Display
24
A16381TMEU
5.5 Power Saving/Night Quiet Schedule Setting
This function starts and stops power savings control and operation noise reduction control at the desired time.
The power savings schedule controls the schedule set in the power savings mode setting.
NOTES:
•
When managing multiple patterns of schedules on the same day as in below examples, don't set overlapped
times zone.
•
(14:00 in the case of the example 2).
Example of Power Saving Example of Power Saving Schedule Operation
Operation and Schedule Setting Example 1
Ο
Example 2
✖
①
Schedule day and time setting (Page 25 )
You can set the desired time and level.
②
Schedule turn ON / OFF setting (Page 26 )
Schedule operation is not performed while the schedule is disabled.
This is a function that temporarily prevents the schedule from
running.
It is used when there is a long vacation.
MED
LOW
HIGH
OFF
08:00㻌 10:00 12:00 14:00 16:00 18:00
1
23
45
Monday Schedule
ON Time OFF Time Level
08 : 00 10 : 00 LOW~
10 : 00 12 : 00 MED
~
12 : 00 14 : 00 HIGH~
14 : 00 16 : 00~ MED
16 : 00 18 : 00~ LOW
1
2
3
4
5
Press Up and Down to adjust
(Mon) 16:30
Back
Monday Schedule
ON Time OFF Time Noise Reduction level
08 : 00 18 : 00 LOW~
10 : 00 16 : 00 MED
~
12 : 00 14 : 00 HIGH~
1
2
3
4
5
Press Up and Down to adjust
(Mon) 16:30
Back
-- : -- -- : --~
-- : -- -- : --~
Intermittent Control
Turn OFF Schedule
Turn OFF
Schedule
Mon
Tue
Wed
Thu
Fri
Sat
Sun
0 6 12 18
ON
(Mon) 16:30
BackOK to turn on/off schedule
①
②
To Next Page
Loading...
