EasyManua.ls Logo

Hitachi RAS-8.0HNBRMQ1 - Transportation

Hitachi RAS-8.0HNBRMQ1
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
2.5 Transportation
Transport the product as near to the installation location before unwrapping the package.
NOTICE
Do not put any material or stand on the product.
Apply two lifting wires onto the outdoor unit, when lifting it by crane.
The Method of Hanging
When hanging the unit, ensure a balance of the unit, ensure its safety and lift up smoothly.
(a) Do not unwrap the package until the hanging work is nished.
(b) The hanging work can be followed the next figure:
NOTES:
Make sure the unit is in horizontal while lifting.
Do not hook with the plastic bands.
If the unit is lifted after unwrapping the package, protect the unit with the corner paddings or cloth.
Attach corner padding or cloth here
The weight of outdoor units is shown in the following table.
Model Net Weight (kg) Gross Weight (kg)
RAS-3.0HNBRKQ1
RAS-3.5HNBRKQ1
75 85
RAS-4.0HNBRKQ1
RAS-4.5HNBRKQ1
RAS-5.0HNBRKQ1
114 124
RAS-6.0HNBRKQ1
RAS-6.5HNBRKQ1
118 128
RAS-7.0HNBRMQ1
RAS-8.0HNBRMQ1
154 168
More than 60°
Wire Rope
0.7m~1.0m
Apply rope
through the
square hole
Do not remove
corrugated paper
frame and plastic
band

Other manuals for Hitachi RAS-8.0HNBRMQ1

Related product manuals