Hitachi RC-AGS1EA0E - My Mode Programming; Entering and Selecting Settings

Enter to My Mode programming
● Press the My Mode button continuously for 5 seconds .
● " "blinks on the LCD. And " " , " " or " " any one appear at the right of
" ".
The blinking of " " will remain for 10 seconds.
By pressing the
(My Mode) button, “ ”, “ ” or “ ” can be
selected for programming.
My Mode(Programming)
●
Use this mode for personalized comfortable settings. The My Mode can be set by using the remote controller.
●
Up to 3 programs can be set.
Default Setting of My Mode
Programming of My Mode
My Mode Mode Temperature Fan Speed SilentON Timer /
OFF Timer
My Mode1 COOL 25.℃ Auto
No setting No setting
My Mode2 COOL 25.℃ Auto
No setting No setting
My Mode3 COOL 25.℃ Auto
No setting No setting
Mode Selection
Press (Mode) button in order to select desired Mode during “ ”
(Heat) (Auto) (Cool) (Dry)
blinks.
Mode will change from
(Fan) cyclically.
Fan Speed Selection
Press (Fan Speed) button in order to select desired Fan Speed
during “ ” blinks.
Available Fan speed only can be selected as per selected desired mode.
Desired Room Temperature Selection
Press button or button in order to select desired Room
Temperature during “ ” blinks.
Temperature range can be set between 16.0℃ and 32.0℃.
Fan Mode can not be set desired Room Temperature.
Silent Mode Selection
Press (Silent) button in order to set or cancel Silent Mode during
“ ” blinks.
1
●
●
●
●
●
2
●
●
●
●
3
●
●
4
●
●
●
5
-23-
-24-