Section 5 Configuring the IED and changing settings..............................................55
5.1 Overview............................................................................................................................. 55
5.2 Configuring analog CT inputs..............................................................................................55
5.3 Supervision of input/output modules................................................................................... 56
Section 6 Establishing connection and verifying the SPA/IEC communication.....57
6.1 Entering settings..................................................................................................................57
6.1.1 Entering SPA settings........................................................................................................57
6.1.2 Entering IEC settings.........................................................................................................57
6.2 Verifying the communication............................................................................................... 57
6.2.1 Verifying SPA communication........................................................................................... 58
6.2.2 Verifying IEC communication............................................................................................ 58
6.3 Fiber optic loop....................................................................................................................58
6.4 Optical budget calculation for serial communication with SPA/IEC ....................................59
Section 7 Establishing connection and verifying the LON communication........... 61
7.1 Communication via the rear ports ...................................................................................... 61
7.1.1 LON communication..........................................................................................................61
7.1.2 The LON Protocol..............................................................................................................62
7.1.3 Hardware and software modules.......................................................................................62
7.2 Optical budget calculation for serial communication with LON .......................................... 63
Section 8 Establishing connection and verifying the IEC 61850 communication..65
8.1 Overview............................................................................................................................. 65
8.2 Setting the station communication...................................................................................... 65
8.3 Verifying the communication .............................................................................................. 65
Section 9 Establishing connection and verifying the IEEE C37.118/1344
communication............................................................................................ 67
9.1 Overview............................................................................................................................. 67
9.2 Setting the PMU station communication (PMU Report)...................................................... 67
9.3 Setting the PMU station communication (PMU configuration)............................................ 67
9.4 Setting the TCP/UDP client communication........................................................................68
9.5 Verifying the communication............................................................................................... 71
9.5.1 Verifying the IEEE C37.118/1344 TCP communication.....................................................71
9.5.2 Verifying the IEEE C37.118/1344 UDP communication.................................................... 77
9.6 Optical budget calculation for PMU - PDC communication.................................................78
Section 10 Testing IED operation..................................................................................79
10.1 Preparing for test.................................................................................................................79
10.1.1 Requirements....................................................................................................................79
10.1.2 Preparing the IED to verify settings...................................................................................80
10.2 Activating the test mode......................................................................................................81
10.3 Preparing the connection to the test equipment..................................................................81
10.4 Connecting the test equipment to the IED...........................................................................82
10.5 Releasing the function to be tested.....................................................................................82
10.6 Verifying analog primary and secondary measurement...................................................... 83
Table of contents 1MRK 505 378-UEN Rev. K
2 Line differential protection RED670
Commissioning manual
© 2017 - 2022 Hitachi Energy. All rights reserved
To Next Page