Hitachi RPI-6.0FSN4E - RCI - 4-Way Cassette (1.0-6.0)FSN3; Removing Air Filter and Air Inlet Grille

10 Servicing
304
SMGB0077 rev.0 - 01/2013
10.1 RCI - 4-way cassette (1.0-6.0)FSN3
10.1.1 Removing Air Filter and Air Inlet Grille
1 The air lter is attached inside the air inlet grille. While pushing
both ends of knobs at the air inlet grille toward the arrow
direction, open the air inlet grille.
2 Hold the lower side of the air inlet grille keeping it inclined.
Remove the hooks of air lter from the air inlet grille and
remove the air lter.
3 Remove the supporting string from the air panel.
After lifting the air inlet grille keeping it inclined, draw the air
inlet grille forward to remove.
4 When attaching the air inlet grille, the supporting string shall be
attached to the air panel.
C A U T I O N
TURN OFF all power source switches.
Knob
Air Inlet Grille
Upper Part of Filter
Hook
Hook
Lower Part of Filter
Air Filter
Air Inlet Grille
Supporting String