Hitachi RPI-6.0FSN4E - Change in the Air Outlet Direction (RPFI Units); RPF: Optional PC-ART Remote Control Location

2 Unit installation
SMGB0077 rev.0 - 01/2013
65
2
S
2.8.3 Change in the air outlet direction (RPFI units)
The air outlet direction of the unit can be modied to adapt it to
installation requirements, as shown in the illustration.
1. Lift air outlet -A-.
2. Turn the air outlet on itself until it is opposite its initial position.
3. Tilt the air outlet so that the nozzle is facing forwards.
4. Ret air outlet -A-.
1
2
2
3
4
A
2.8.4 RPF: Optional PC-ART remote control location
It is possible to install the PC-ART remote control below the plastic
cover, as shown in the gure.