Hitachi RPI-6.0FSN4E - Remove the Electrical Box Cover; Remove the Switch Cover

10 Servicing
369
10
SMGB0077 rev.0 - 01/2013
10.9.4 Remove the electrical box cover
Remove the at panel as indicated in section Removal of the at panel. The electrical box cover can be opened without
removing the front panel.
RPK-(0.8-1.5)FSN(H)3M RPK-(2.0-4.0)FSN3M
Electrical
box cover
Switch
cover
Switch cover
Electrical box
cover
Open the electrical box cover by unscrewing the screw.
RPK-(0.8-1.5)FSN(H)3M RPK-(2.0-4.0)FSN3M
A 1 2
Screw for earth
wiring connection
Electrical
box cover
Wire for receiver Kit
Terminal board
for remote control
switch cable
Terminal board for
power source
Fix the wires by
cord clamp
A B 1
Terminal board for
power source
Screw for
earth wiring
connection
Wire for receiver Kit
Terminal board for
remote control switch
cable
10.9.5 Remove the switch cover
Remove the at panel as indicated in section Removal of the at panel. The switch cover can be opened without removing
the front panel.
RPK-(0.8-1.5)FSN(H)3M RPK-(2.0-4.0)FSN3M
PCB2
Switch cover
PCB2
Switch cover