Hitachi S1-00073HFE - Page 134

S1 series standard inverter
-129-
Function
code
Name
Detailed parameter description
Default
value
Modify
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotuning fault (tE)
21: EEPROM operation fault (EEP)
22: PID feedback offline fault (PIDE)
23: Brake unit fault (bCE)
24: Running time reached (END)
25: Electronic overload (OL3)
26: Keypad communication error (PCE)
27: Parameter upload error (UPE)
28: Parameter download error (DNE)
29 - 31: Reserved
32: To-ground short-circuit fault 1 (ETH1)
33: To-ground short-circuit fault 2 (ETH2)
34: Speed deviation fault (dEu)
35: Mal-adjustment fault (STo)
36: Underload fault (LL)
37: Safe torque off (STO)
38: Channel H1 safety circuit exception (STL1)
39: Channel H2 safety circuit exception (STL2)
40: Channel H1 and H2 exception (STL3)
41: Safety code FLASH CRC fault (CrCE)
P07.33
Running frequency of present fault
0.00Hz
●
P07.34
Ramps reference frequency of present fault
0.00Hz
●
P07.35
Output voltage of present fault
0V
●
P07.36
Output current of present fault
0.0A
●
P07.37
Bus voltage of present fault
0.0V
●
P07.38
Max. temperature of present fault
0.0°C
●
P07.39
Input terminal state of present fault
0
●
P07.40
Output terminal state of present fault
0
●
P07.41
Running frequency of the last fault
0.00Hz
●
P07.42
Ramps reference frequency of the last fault
0.00Hz
●
P07.43
Output voltage of the last fault
0V
●
P07.44
Output current of the last fault
0.0A
●
P07.45
Bus voltage of the last fault
0.0V
●
P07.46
Max. temperature of the last fault
0.0°C
●
P07.47
Input terminal state of the last fault
0
●