To Next PageTo Next PageWhat to do if the lid of my Hitachi SF-P90XA does not open?
If the lid of your Hitachi Washer won't open, it might be locked. This can happen for a couple of reasons: 1. The lid lock indicator is lit, meaning the lid is actively locked. 2. There was a power outage or the power was turned off while the lid lock indicator was lit. If this is the case, turn the power back on and wait for the lock to release.
How to troubleshoot a Hitachi Washer that does not operate?
If your Hitachi Washer isn't operating, here are a few things to check: * Make sure the power plug is properly inserted into the power outlet. * Verify that there isn't a power outage in your area. * Ensure that the Delay Timer hasn't been activated.
Why does my Hitachi Washer stop during the spin cycle and add water?
If your Hitachi Washer stops during the spin cycle and starts adding water, it's likely because the laundry is extremely off balance. To correct this, the washer stops the spin cycle and starts the rinse cycle to rebalance the load. Once the load is rebalanced, the spin cycle will start again.
Why is the wash time longer than set on my Hitachi SF-P90XA?
If the wash time on your Hitachi Washer is longer than what you set, it could be due to low water pressure. A longer water supply time can increase the overall operating time.
Why is water added again during the washing process in my Hitachi Washer?
During the wash cycle, your Hitachi Washer may automatically add water to maintain the set water level. This happens if the water level drops because the laundry absorbs water.
Why does the remaining time increase during operation on my Hitachi SF-P90XA Washer?
The remaining time on your Hitachi Washer might increase during operation because the washer adjusts the time to compensate for the speed of the incoming water.
Why is my new Hitachi SF-P90XA wet inside?
Your new Hitachi Washer might be wet due to moisture or water remaining in the tub or hoses from the performance test conducted before it was shipped from the factory.
Why doesn't the water flow strength change on my Hitachi SF-P90XA when I adjust the indicator?
The strength of the water flow on your Hitachi Washer may not change when adjusting the indicator depending on the wash process and the load amount. This is not abnormal.
General| Capacity | 9 kg |
|---|---|
| Spin Speed | 1400 RPM |
| Delay Start | Yes |
| Child Lock | Yes |
| Loading Type | Front Loading |
| Noise Level (Wash/Spin) | 74 dB |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Energy Rating | A+++ (-10%) |
| Programs | 15 |
Instructions on how to dispose of packaging materials responsibly.
Guidance on safely discarding the washing machine.
Critical precautions to avoid death, injury, or property damage.
Safety guidelines for installing the washing machine.
Electrical safety precautions related to the power supply.
Precautions to prevent injury to children around the appliance.
Safety guidelines for operating and maintaining the appliance.
List of items provided with the washing machine package.
Information on additional accessories available for purchase.
Explains the function of each button on the control panel.
Describes the meaning of various indicators on the washing machine display.
Explains detergent, water level, sensing, timer, and lid lock indicators.
Steps for preparing and sorting clothes before washing.
Guidance on using detergents, softeners, and bleaches.
Guide to sorting, powering on, selecting programs, and starting operation.
Instructions for detergent, program management, and using Eco modes.
Guides on using Blanket, Tub Dry, and Tub Clean programs.
How to set a delayed start time for washing cycles.
Details on Fuzzy, Energy Save, and Small Load programs.
Details for Powerful, Water Save, and Speedy wash programs.
Details for Delicate, Blanket, and Soak wash programs.
General notes on program timing, softeners, and detergent quantity.
Guide to customizing wash, rinse, and spin settings for the Fuzzy program.
How to perform wash-only, no-spin, rinse-only, and drain/spin operations.
Details on setting water level, wash time, rinse types, and spin time.
Explains how the machine restarts after a power interruption.
Step-by-step guide to cleaning the cassette-type lint filter.
Instructions for cleaning the water inlet and softener dispenser.
Guidance on cleaning the exterior of the washing machine.
Critical safety advice and guidelines for choosing an installation location.
Instructions for connecting water supply, drain hoses, and power.
How to level the machine and perform final checks after installation.
Advice on what information to provide when contacting customer service.
