SJ100 Inverter
v
Index to Warnings and Cautions in This Manual
Installation - Cautions for Mounting Procedures
Wiring - Warnings for Electrical Practices and Wire Specifications
CAUTION: Be sure to install the unit on flame-resistant material
such as a steel plate. Otherwise, there is the danger of fire.
........... 2–6
CAUTION: Be sure not to place any flammable materials near the
inverter. Otherwise, there is the danger of fire.
........... 2–6
CAUTION: Be sure not to let the foreign matter enter vent openings
in the inverter housing, such as wire clippings, spatter from welding,
metal shavings, dust, etc. Otherwise, there is the danger of fire.
........... 2–6
CAUTION: Be sure to install the inverter in a place which can bear
the weight according to the specifications in the text (Chapter 1,
Specifications Tables). Otherwise, it may fall and cause injury to per-
sonnel.
........... 2–6
CAUTION: Be sure to install the unit on a perpendicular wall which
is not subject to vibration. Otherwise, it may fall and cause injury to
personnel.
........... 2–6
CAUTION: Be sure not to install or operate an inverter which is
damaged or has missing parts. Otherwise, it may cause injury to per-
sonnel.
........... 2–6
CAUTION: Be sure to install the inverter in a well-ventilated room
which does not have direct exposure to sunlight, a tendency for high
temperature, high humidity or dew condensation, high levels of dust,
corrosive gas, explosive gas, inflammable gas, grinding-fluid mist,
salt damage, etc. Otherwise, there is the danger of fire.
........... 2–6
WARNING: “Use 60/75°C Cu wire only” or equivalent. ......... 2–12
WARNING: “Open Type Equipment.” ......... 2–12
WARNING: “A Class 2 circuit wired with Class 1 wire” or equiva-
lent.
......... 2–12
WARNING: “Suitable for use on a circuit capable of delivering not
more than 5,000 rms symmetrical amperes, 240 V maximum.” For
models with suffix N or L.
......... 2–12
To Next Page
Loading...
Need help?
General