Need help?Do you have a question about the Hitachi SJ700-220HFEF2 and is the answer not in the manual?
General| Model | SJ700-220HFEF2 |
|---|---|
| Rated Output Power | 22 kW |
| Output Frequency | 0-400 Hz |
| Cooling Method | Forced air cooling |
| Rated Power (HP) | 30 HP |
| Input Phase | 3-phase |
| Overload Capacity | 150% for 60 seconds |
| Humidity | 5 to 95% RH (non-condensing) |
| Enclosure Rating | IP20 |
| Control Method | V/F control, Sensorless vector control |
| Protection Features | Overvoltage, undervoltage, short circuit |
| Ambient Temperature | -10 to 50°C |
| Altitude | Up to 1000m above sea level |
Features for high starting torque and simplified motor constant setting.
Functions to prevent inverter trips during operational changes.
Simple sequence operation via EzSQ software for inverter control.
Handles short power interruptions without tripping the inverter.
Provides a high-quality, hardware-based emergency stop function.
Detailed electrical and mechanical specs for 200V models.
Detailed electrical and mechanical specs for 400V models.
Comprehensive list of control, input/output, and environmental specifications.
Comprehensive list of monitoring and main profile parameters.
Configuration parameters for intelligent input terminals.
Configuration parameters for intelligent output terminals.
Parameters for tuning motor control constants.
Explains the causes behind various protective function triggers.
To Next Page