Need help?Do you have a question about the Hitachi SJ100 Series and is the answer not in the manual?
General| Control Method | V/f control, Sensorless vector control |
|---|---|
| Overload Capacity | 150% for 60 seconds |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit |
| Built-in Functions | PID Control, Torque Control |
| Communication Options | RS-485 (Modbus RTU) |
| Cooling Method | Forced Air Cooling |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5-95% (non-condensing) |
| Altitude | Up to 1000m above sea level (Derating required above 1000m) |
To Next Page