Hitachi SJ100 Series - B Group: Fine-Tuning Functions

17
“B” Group: Fine-tuning Functions
A_93/
A293
Deceleration (2) time setting 15.0
A_94/
A294
Select method to switch to Acc2/Dec2
profile
• 00 2CH input from terminal
• 01 transition frequency
00
A_95/
A295
Acc1 to Acc2 frequency transition point 0.0
A_96/
A296
Dec1 to Dec2 frequency transition point 0.0
A_97 Acceleration curve selection
• 00 Linear • 01 S-curve
• 02 U-shape • 03 Reverse
U-shape
00
A_98 Deceleration curve selection
• 00 Linear • 01 S-curve
• 02 U-shape• • 03 Reverse
U-shape
00
Func.
Code
Name / Description
Default
Value
–FE / –FU /
–FR
Set
Value
B_01 Selection of automatic restart mode
• 00 Alarm output after trip, automatic
restart disabled
• 01 Restart at 0Hz
• 02 Resume operation after frequency
matching
• 03 Resume previous freq. after freq.
matching, then decelerate to stop and
display trip info
00
B_02 Allowable under-voltage power failure
time
1.0
B_03 Retry wait time before motor restart 1.0
Func.
Code
Name / Description
Default
Value
–FE / –FU /
–FR
Set
Value