14
Parameter tables for user-settable functions follow these conven-
tions:
• Some parameters have 2nd motor equivalents, indicated by the
x2xx parameter codes in the left-most column.
• Some parameters specify an option code. Where applicable, the
options codes will be in a bulleted list in the Name/Description
column.
• The default values apply to all models unless otherwise noted for
each parameter... –FE (Europe) / – FU (U.S.) / –FR (Japan).
• Some parameters cannot be edited during Run Mode, and certain
Software Lock settings (B_31) can prohibit all edits. If in doubt,
place the inverter in Stop Mode or consult the inverter manual for
details.
“F” Group: Main Profile Parameters
“A” Group: Standard Functions
Func.
Code
Name / Description
Default
Value
Set
Value
F_01 Output frequency setting 0.0
F_02 Acceleration (1) time setting 10.0
F202 Acceleration (1) time setting, 2nd motor 10.0
F_03 Deceleration (1) time setting 10.0
F203 Deceleration (1) time setting, 2nd motor 10.0
F_04 Keypad Run key routing
•00Forward •01Reverse
00
Func.
Code
Name / Description
Default
Value
–FE / –FU /
–FR
Set
Value
A_01 Frequency source setting
• 00 Keypad potentiometer
• 01 Control terminal
• 02 Function F_01 setting
01 / 01 / 00
To Next Page
Loading...
