Hitachi SJ100 Series - Page 17

16
A_43/
A243
Manual torque boost frequency adjust-
ment
10.0
A_44/
A244
V/f characteristic curve selection
• 00 V/f constant torque
• 01 V/f variable torque
• 02 Sensorless vector control
02
A_45 V/f gain setting 100
A_51 DC braking enable
• 00 Disable • 01 Enable
00
A_52 DC braking frequency setting 0.5
A_53 DC braking wait time 0.0
A_54 DC braking force during deceleration 0
A_55 DC braking time for deceleration 0.0
A_61 Frequency upper limit setting 0.0
A_62 Frequency lower limit setting 0.0
A_63
A_65
A_67
Jump (center) frequency setting 0.0
A_64
A_66
A_68
Jump (hysteresis) frequency width
setting
0.5
A_71 PID Enable
• 00 PID operation OFF
• 01 PID operation ON
00
A_72 PID proportional gain 1.0
A_73 PID integral time constant 1.0
A_74 PID derivative time constant 0.0
A_75 PV scale conversion 1.00
A_76 PV source setting
• 00 [OI] terminal (current input)
• 01 [O] terminal (voltage input)
00
A_81 AVR function select
• 00 AVR enabled • 01 AVR disabled
• 02 AVR enabled except during decel
02 / 00 / 02
A_82 AVR voltage select 230/230/200
400/460/400
A_92/
A292
Acceleration (2) time setting 15.0
Func.
Code
Name / Description
Default
Value
–FE / –FU /
–FR
Set
Value