Hitachi SJ100 Series - Keypad Navigational Map

Using Keypad Devices
Configuring
Drive Parameters
3–4
Keypad Navigational Map
Whether you use the keypad on the inverter, the DOP software for the personal
computer, or the hand-held digital operator panel, each navigates the same way. The
diagram below shows the basic navigational map of parameters and functions.
NOTE: The inverter 7-segment display shows lower case “b” and “d”, which means the
same as the upper case letters “B” and “D” used in this manual (for uniformity “A to F”).
NOTE: The Store Key saves the edited parameter (shown in the display) to the
EEPROM in the inverter, regardless of the programming device. Upload and download
of parameters is accomplished through a separate command — do not confuse Store with
Download or Upload.
0000
1
2
Monitor Mode
09D
2
1
Program Mode
01D
--H
--C
--B
--A
04F
01F
91C
01C
92B
01B
98A
01A
34H
01H
3241
Edit
Write
data to
EEPROM
Increment/
decrement
value
2
1
2
1
2
1
2
1
2
1
2
1
2
1
How to Navigate
2
1
1
Select ParameterSelect FunctionDisplay
Data
2
PRG LED = OFF
PRG LED = ON
Return to
parameter
list
2
1
2
1
2
1
2
1
2
1
2
1
2
1
Edit Parameter
STR
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC.
FUNC. FUNC.
Note:
Use the
key to move left
and right, and the
(arrow)
keys to move up
and down.
FUNC.
1
2