Hitachi UX Supplementary Instructions

●[Instruction Manual] Supplementary items 1
[Instruction Manual] Supplementary items
1. [Instruction Manual] Supplementary items of “1. Usage precautions
1.1 Ink and makeup (2) Ink periodic replacement”
For the replacement procedure, see “6.3 Replacing the ink” in the Technical Manual.
● While the IJ printer ink circulates for operations, it reacts with atmospheric air elements and deteriorates with time.
Therefore, it needs periodic replacement.
The table below furnishes a guide for determining the proper replacement intervals. However, since the proper
replacement intervals vary with the printer operating environmental conditions (temperature, humidity, dust, etc.),
determine the best replacement intervals in accordance with the obtained printings, and replace all ink within the
printer with new ink.
Ink type
Applicable
makeup
Solvent base
Replacement intervals
(operating hours or elapsed months whichever comes earlier)
Approximate operating hours Approximate elapsed months
1067K
S100A
MEK
600 to 1200 6
1069K
S1069
600 to 1200 6
1072K
S1018
600 to 1200 6
2086K
S2086
Acetone 600 to 1200 6
1087K
S1018
MEK
600 to 1200 6
1092F
S1018
600 to 1200 6
1095B
S1018
600 to 1200 6
1106K
S1018
600 to 1200 6
3112K
S300F
Ethanol 300 to 600 3
1113K
S1018
MEK
600 to 1200 6
1114K
S1018
600 to 1200 6
1117K
S1018
600 to 1200 6

Hitachi UX Specifications

General

Brand	Hitachi
Model	UX
Category	Printer
Language	English