Hitachi UX2 Series User Manual

i
HITACHI Printer
Model UX2
Basic Operation Manual
● This manual describes the basic operating procedures for the printer.
● Before using the printer, thoroughly read the separate instruction manual
for optimum printer use.
● After reading this basic operation manual, properly keep it for future
reference.

Hitachi UX2 Series Specifications

General

Power Supply	100 - 240 VAC, 50/60 Hz
Operating Temperature	5°C to 35°C
Print Speed	Up to 984 ft/min (300 m/min)
Connectivity	USB
Weight	14 kg

Summary

Chapter 1. Delivered Items and Accessories

1.1. Delivered Items and Accessories

Lists all items and accessories included with the printer for setup and use.

Chapter 2. Component Names and Functions

2.1. External Views

Identifies and describes the external parts of the printer unit, including front and rear views.

2.2. Unit Internal Parts Arrangement

Details the layout and components located inside the printer unit.

2.3. Print Head

Explains the internal structure and components of the print head.

2.4. Head Cleaning Unit

Describes the structure and components of the head cleaning station.

2.5. Screen Display

Illustrates and explains the various screens and messages displayed on the printer's interface.

Chapter 3. Basic Operation

3.1. Start Operation

Guides the user through the procedures for starting the printer unit.

3.2. Shutdown Operation

Explains the correct procedures for shutting down the printer unit.

3.3. Print Head Cleaning

Details the methods for cleaning the print head using a cleaning bottle or station.

Chapter 4. Ink and Makeup Replenishment

4.1. Replenishing Ink

Provides instructions and precautions for refilling the ink in the printer.

4.2. Replenishing Makeup

Outlines the procedures and precautions for refilling the makeup solution.

Chapter 5. Emergency Procedures

Emergency Operations

Describes actions to take during emergencies like earthquakes, fires, or power failures.