Hitachi UX2 Series - Chapter 1. Delivered Items and Accessories

Chapter 1. Delivered Items and Accessories
1-4
The accessories only supplied as option are shown in the table below.
No.
Item name
Quantity
Item code
No.
Remarks
1
Cleaning unit
mounting jig
2
-
Used to mount the cleaning unit on the
printer. (One of the two is a spare.)
2
Cleaning unit
stopper
4
-
Used to mount the cleaning unit on the
printer. (Two of the four are spares.)
3
M3 screw
4
-
M3 x 10 (Pan head tapping screw)
For fixing the cleaning unit stopper
4
M4 screw
4
-
M4 x 8 (Pan head SEMS screw)
For fixing the cleaning unit mounting jig
5
Cleaning unit filter
2
-
Used to mount the cleaning unit during
installation. (One of the two is a spare.)
6
Recovery bottle
label
1
-
For managing the start date of use of the
recovery bottle
- To order an accessory, please let Hitachi know the "item name" and the "item code No.".