Hitachi RX User Manual

HITACHI Printer
Instruction Manual
INK JET PRINTER FOR INDUSTRIAL MARKING
Model RX
Thank you for purchasing the Hitachi IJ Printer Model RX.
This printer employs a noncontact, ink-jet method to print onto a print target.
This instruction manual describes the basic operating procedures, maintenance procedures, and other detailed
handling procedures of the Hitachi IJ Printer Model RX.
If the printer is improperly handled or maintained, it may not operate smoothly and may become defective or
cause an accident. It is therefore essential that you read this manual to gain a complete understanding of the
printer and use it correctly.
After thoroughly reading the manual, properly store it for future reference.
IF you changed the language of the screen by mistake, see Chapter 7.8 "Selecting Languages".

Hitachi RX Specifications

General

Brand	Hitachi
Model	RX
Category	Printer
Language	English

Summary

SAFETY PRECAUTIONS

1. USAGE PRECAUTIONS

1.1 Ink and makeup

Discusses ink and makeup replenishment and periodic replacement.

1.3 Print head cleaning

Instructions for cleaning the printer's print head to maintain performance.

2. COMPONENT NAMES AND FUNCTIONS

2.3 Print head

Details about the printer's print head and its function in printing.

3. BASIC OPERATION

3.1 Start operation

Step-by-step guide for starting up the printer and preparing it for use.

3.2 Shut down operation

Procedures for properly shutting down the printer to prevent damage.

3.3 Basic operation

General overview of basic printer operations and navigation.

4. CREATION AND PRINTING OF MESSAGES

4.1 Print description screen (initial screen)

Overview of the initial screen for message creation and printing.

4.2 Edit messages to be printed (Change message screen)

How to edit existing messages or create new ones for printing.

4.3 Call and print saved messages

Instructions for retrieving and printing previously saved messages.

4.6 Save created messages

4.7 Set the print format

Customizing the layout, character size, and appearance of printed messages.

4.8 Print characters

4.9 Use the calendar function

4.12 Use the count function

4.13 Set the print specifications

Adjusting various printing parameters like character height, width, and orientation.

5. MAINTENANCE

7. AUXILIARY FUNCTIONS

7.1 Manage messages

Operations for managing stored messages: name change, deletion, number, and group.

7.2 Manage group

7.3 Creating a user pattern

7.5 Backing up data to USB memory

8. INK AND MAKEUP REPLENISHMENT

8.1 Replenishing the ink

Steps for refilling the ink reservoir when an "Ink Low" warning is generated.

8.2 Replenishing the makeup

Procedures for refilling the makeup reservoir when a "Makeup Low" warning is generated.

9. WHEN WARNING OR FAULT WAS GENERATED

9.1 Display when warning or fault was generated

9.2 On-screen message descriptions

Detailed explanations of various on-screen messages, including causes and remedies.

9.4 Remedial Action to Be Taken in the Event of a Printing Failure

Troubleshooting steps for common printing failures, including probable causes and solutions.

10. TROUBLESHOOTING GUIDE

11. EMERGENCY PROCEDURES