Hitachi UX

HITACHI Printer
Basic Operation Manual
INK JET PRINTER FOR INDUSTRIAL MARKING
Model UX
Thank you for purchasing the Hitachi IJ Printer Model UX.
This printer employs a noncontact, ink-jet method to print onto a print target.
This Basic operation manual describes the basic handling procedures of the Hitachi IJ Printer Model UX.
If the printer is improperly handled or maintained, it may not operate smoothly and may become defective or
cause an accident. It is therefore essential that you read the Instruction manual to gain a complete
understanding of the printer and use it correctly.
After thoroughly reading the manual, properly store it for future reference.
IF you changed the language of screen by mistake,see the Instruction Manual chapter 7.8 "Selecting Languages".

Hitachi UX Specifications

General

Brand	Hitachi
Model	UX
Category	Printer
Language	English

Summary

Safety Precautions

General Safety Precautions

Covers warnings, cautions, pictographs, and general safety rules.

Handling Ink and Makeup

Installation and Electrical Safety

Usage Precautions

InkMakeup Management and Cleaning

Installation and Connection

Installation Precautions

Basic Operation

Starting and Shutting Down the Printer

Step-by-step procedures for starting and shutting down the printer.

Ink and Makeup Replenishment

Replacing Ink Cartridges

Detailed guide for refilling ink, including IC tag reading.

Replacing Makeup Cartridges

Detailed guide for refilling makeup, including IC tag reading.

Error Handling

Warning and Fault Messages

Printing Failure Remediation

Troubleshooting and Maintenance

Troubleshooting Guide

Common operational problems and their solutions.

Maintenance and Emergency Procedures