7-14 ●Shut down operation
7.2.2 Stopping ink ejection by pressing the screen button
● Perform ink stop processing using the following procedure.
(1) UX-D,E
TEST
STARTPRINTING
SHUTDOWN
SETTINGS
LOGIN
Shutdown Process Confirmation No.052
CONFIRMATION
×
Shutdown will stop the ink jet.
Solution 1. To stop the ink jet, press <OK>.
2. To stop the ink without cleaning, press <No-cleaning stop>.
3. To execute the auto power shutdown process after ink stop.
press <STOP>.
OK CloseSTOP
No-cleaning
stop
Press the SHUTDOWN → OK .
A confirmation screen is displayed.
1
●Wait for the status to change from “Stopping” to “Stop”.
Press SHUTDOWN .
Stops ink jet.
Turns OFF the power after ink jet is stopped.
To Next Page
Loading...
