Hitachi UX2 Series - Stopping Ink Ejection by Pressing Screen Button

Chapter 3 Basic Operation
3-14
3.2.2. Stopping Ink Ejection by Pressing Screen Button
● Use the following procedure to stop ink ejection.
Procedure to stop ink ejection
Press Shutdown at the bottom right of the [HOME] screen.
Careful cleaning
● This is a function to clean the printer carefully when the unit is frequently used in a high-temperature
environment, or before the weekend, such as a 2-3 day shutdown period. This careful cleaning uses a
larger amount of makeup than normal cleaning.
● Contact your nearest distributor to use this function.
Stops ink ejection with cleaning the circulation route. This button does not turn off the power.
Turns OFF the power automatically after ink jet is stopped, like the STOP switch.
Press Shutdown.
Stops ink ejection without cleaning the circulation route. (Not recommended)