Operation name Condition
Delete LUN paths When you specify an iSCSI target and open the Delete L
UN
Paths window, the specied iSCSI target must be assigned
to the Storage Administrator group permitted to manage
them.
When you specify LDEVs and open the Delete LUN Paths
window, the specied LDEVs must be assigned to the
Storage Administrator group permitted to manage them.
When selecting the Delete all dened LUN paths to above
LDEVs check box, the iSCSI target of all the alternate paths
in the LDEV displayed on the Selected LUNs table must be
assigned to the Storage Administrator group permitted to
manage them.
Add hosts The specied iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
Edit hosts The specied iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
When you select the Apply same settings to the HBA WWN
of all ports check box, all the iSCSI targets where the
specied HBA WWNs are registered must be assigned to the
Storage Administrator group permitted to manage them.
Remove hosts The specied iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
Edit ports The specied port must be assigned to the Storage
Administrator group permitted to manage them.
Create alternative LUN
paths
The specied iSCSI target and all the LDEVs where the paths
are set to the iSCSI target must be assigned to the Storage
Administrator group permitted to manage them.
Copy LUN paths The specied iSCSI target and the LDEVs where the paths
are set must be assigned to the Storage Administrator
group permitted to manage them.
Edit command devices LDEVs where the specied paths are set must be assigned
to the Storage Administrator group permitted to manage
them.
Edit UUIDs The specied LDEV must be assigned to the Storage
Administrator group permitted to manage them.
Delete UUIDs The specied LDEV must be assigned to the Storage
Administrator group permitted to manage them.
Release Host-Reserved
LUNs
LDEVs where the specied paths are set must be assigned
to you.
Access requirements for LUN Manager
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 105