Advanced Techniques - 25 -
Date Recording
When the date has been set, the camcorder will enter the automatic date recording mode automatically.
1. Press the red button on the CAM/OFF/VIDEO switch as you slide it to CAM.
2. Press the DATE/TITLE button to specify the date display you want to record.
AUTO and Date - Automatic Date Recording
This option records the date automatically once a day at the beginning of recording for ten seconds
Note: The camcorder records the same date when;
- the cassette is replaced.
- you select AUTO and date display again.
- the recording is less than 10 seconds long.
Note: If the date changes while recording continues over 10 seconds, the new date is recorded for about 10
seconds the next time you make a recording.
TITLE and Date - Automatic Title and Date Recording
This option records the date and created title (see "Creating and Recording a Title" on page 43) automatically
once a day at the beginning of recording for 10 seconds.
Note: When TITLE is displayed in the viewfinder, the title cannot be turned on or off using the remote
control.
Date - Date Recording
The camcorder records the date with the picture all the time.
No Display - No Date Recording
The camcorder does not record the date.
Date and Time - Date and Time Recording
The camcorder records the date and time with the picture all the time.
To Next Page
Loading...
