Advanced Techniques
46
Using Instant Review
Use this feature to view the last few seconds of the tape you shot.
1. Set the camera/recorder to record/pause mode and tap the REW/REVIEW button.
The last few seconds of tape play back in reverse and then in normal playback mode.
2. The camera plays back to the spot where you paused and returns to record/pause
mode (standby). Press the Start/Stop button to resume recording.
Using Quick Edit
Use quick edit to search for the end of previously recorded material, find a particular
spot on your tape, begin editing, or record new material. While the camera is in
record/pause mode hold down the F.FWD, REW/REVIEW, or PLAY button and visually
search the tape. Release the button and the camera/recorder stops the tape at the
exact position you selected.
Using Macro
This function allows you to shoot subjects as close as 3/8 of an inch. Press and hold the
power zoom control W. The camera focuses on the subject automatically. Check your
lighting as it tends to be insufficient when filming close up.
To Next Page
Loading...
Need help?
General
