Hitachi VM-H620A - Using Forward and Reverse Search; To Play Back a Recording at Double the Normal Speed

Basic Techniques - 32 -
Note: When you engage play/pause mode the still picture will have some interference or
noise. This is normal.
Using Forward and Reverse Search
When looking for a particular point in your videotape use the F.F button and REW button to find
the spot quickly.
• Press F.F button during playback to play the tape forward at approximately 9 times normal
speed. Press PLAY button to return to normal playback.
• Press REW button during playback to play the tape backwards at approximately 7 times normal
speed. Press PLAY button to return to normal playback.
Note: When you engage F.F button or REW button the picture will have some interference or
noise. This is normal during search mode.
To Play Back a Recording at Double the Normal Speed
Activate the video playback mode by moving the CAM/OFF/VIDEO switch to "VIDEO". Press the
PLAY button located on either the remote control or the camcorder one time and the video will
appear in the viewfinder or a connected monitor. While the tape is playing press the PLAY button
again and the camcorder will now play both audio and video at double speed.
To restore normal playback, press the PLAY button on either the remote control or the
camcorder.