14. In the Set Up Cloud Connection Settings window, enter each item. If you do not need to make any changes, click
Skip this step. If you want to change the cloud connection settings, set each item.
For the details on each item, see the Help of the maintenance utility.
Click [?] at the bottom right of the Set Up Cloud Connection Settings window to see the Help.
If you changed the cloud connection settings, confirm the settings, and then click Apply.
15. When prompted that initial settings are complete, click Close.
Next steps
(Optional) Configure syslog and SNMP notifications.
Configure syslog and SNMP notifications
https://knowledge.hitachivantara.com/Documents/Storage/VSP_E_Series/93-06-4x/VSP_E1090_Installation/01_Installing_yo…
Updated: Sun, 18 Jun 2023 03:59:58 GMT
Powered by
18
To Next Page
Loading...
