For more information about the SVP, see the Service Processor 3 (SVP3) Technical
Reference.
Rack support
The storage system can be installed in the Hitachi Universal V3 Rack, Universal V2B Rack or
Universal V2 Rack as well as non-Hitachi 19-inch racks that meet the storage system's
specifications.
Non-Hitachi racks must be 4-post, EIA 310-D compliant with adequate airflow and weight
capacity. The PDUs must be mounted properly to avoid any issues for servicing the storage
system. The PDU receptacles must face toward the back (not toward each other). The area
behind the storage system and between the vertical 19-inch mounting posts must be free of
PDUs and cable loops.
Rack support
Chapter 2: Hardware overview
Hitachi Virtual Storage Platform E990 Hardware Reference Guide 33
To Next Page
Loading...
