For more information, see the software user documentation.
Parent Topic
• Where to go from here
After concluding the self-installation successfully, perform the following post-installation activities.
Configure storage system for the first time
After you complete the self-installation of your storage system, configure the storage system to suit your requirements
using the management software (Storage Advisor, Device Manager - Storage Navigator, Command Control Interface, or
Hitachi Command Suite).
Typical configuration activities include the following:
• Set up spare drives
• Create pools and volumes
• Configure Fibre Channel ports
• Create a message that appears at login
• Create user accounts, and then back up the accounts
For more information, see the software user documentation.
Parent Topic
• Where to go from here
After concluding the self-installation successfully, perform the following post-installation activities.
Read the release notes
Your storage system undergoes constant development and improvement.
Each time your storage system's firmware is updated, read the release notes. The release notes provide important
information about new features and functions as well as bug fixes.
Parent Topic
• Where to go from here
After concluding the self-installation successfully, perform the following post-installation activities.
Read the latest technical bulletins
Technical bulletins are provided to communicate technical information about your storage system and to assist you with
additional information about the proper use, handling, and solving of technical issues.
https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0…
Updated: Wed, 20 Dec 2023 21:36:41 GMT
Powered by
27
To Next Page
Loading...
