3. In the Edit Pools window of the Edit Pools wizard, complete the
following:
Warning Threshold
• Enter the data pool warning threshold.
• Range: 20% - 95%, in 1% increments.
• Default: 80%
Caution: Excessive pool usage rates (rates over 50%) are
rounded down to the closest integer. Therefore, excessive pool
usage in SIM and SNMP might be reported when the actual pool
usage rate exceeds the threshold, even though the value shown is
only 50%.
4.
Click Finish, and then confirm the settings.
182 Monitoring and maintaining Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
To Next Page
Loading...
