Related tasks
• Resynchronizing Thin Image pairs on page 144
• Deleting Thin Image pairs on page 146
• Increasing pool capacity on page 173
• Recovering blocked pools on page 186
Recovering blocked pools
You can recover blocked pools using the Restore Pools window.
The pool recovery time depends on pool or V-VOL usage and system
workload. Calculate roughly 20 minutes of recovery time for every 100 TB of
pool or V-VOL usage.
Caution: Recover blocked pools for disaster recovery purposes only.
Procedure
1. In the Explorer pane, click Storage Systems, expand the storage
system tree, and then click Pools.
2. In the Pools tab, from the list of pools, select the check box for the pool
that you want to recover, click More Actions > Restore Pools, and
then confirm the settings.
3. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the
following:
\ / : , ; * ? " < > |
4. If you want to monitor the task after submitting it, select Go to tasks
window for status.
186 Monitoring and maintaining Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
To Next Page
Loading...
