SSB2 CCI command Cause of error
9728 paircreate, pairsplit,
pairresync,
pairresync -restore
The command ended abnormally because you specified a volume
that is in the process of being shredded or formatted as the HTI P-
VOL.
9729 paircreate, pairsplit,
pairresync,
pairresync -restore
The command ended abnormally because you specified a volume
as the HTI P-VOL, and that volume has an emulation type other
than OPEN-V.
972A paircreate You cannot create the HTI pair because the volume you specified
as the HTI P-VOL has the command device setting.
972C paircreate You cannot create the HTI pair because the capacity of the volume
you specified as the HTI P-VOL exceeds the supported size.
972E paircreate You cannot create the HTI pair because the capacity of the volume
you specified as the HTI S-VOL exceeds the supported size.
972F paircreate You cannot create the HTI pair because you specified a V-VOL as
the HTI P-VOL.
9730 paircreate You cannot create the HTI pair because you specified a pool-VOL
as the HTI P-VOL.
9731 pairresync -restore You cannot restore the HTI pair because the HTI P-VOL and TC P-
VOL share a volume, and the TC pair is not split ("PSUS" status) or
is suspended and blocked (“PSUE” status).
9732 pairresync -restore You cannot restore the HTI pair because the HTI P-VOL and UR P-
VOL share a volume, and the UR pair is not split ("PSUS" status) or
is suspended and blocked (“PSUE” status).
9733 pairresync -restore You cannot restore the HTI pair because the HTI P-VOL and TC S-
VOL share a volume.
9734 pairresync -restore You cannot restore the HTI pair because the HTI P-VOL and UR S-
VOL share a volume.
9735 paircreate You cannot create the HTI pair because you specified a UR journal
volume as the HTI P-VOL.
973B All commands The command ended abnormally because the LDEV number of the
volume you specified as the HTI S-VOL is beyond the specified
range.
973C All commands The command ended abnormally because you specified an
unmounted volume as the HTI S-VOL.
973D paircreate, pairsplit,
pairresync,
pairresync -restore
The command ended abnormally because you specified a blocked
volume as the HTI S-VOL.
973E paircreate, pairsplit,
pairresync,
pairresync -restore
The command ended abnormally because you specified a volume
that is in process of being shredded or formatted as the HTI S-
VOL.
973F paircreate, pairsplit,
pairresync,
pairresync -restore
The command ended abnormally because you specified a volume
whose emulation type is other than OPEN-V as the HTI S-VOL.
9740 paircreate You cannot create the HTI pair because the volume you specified
as the HTI S-VOL has the command device setting.
9742 paircreate You cannot create the HTI pair because you specified an external
volume as the HTI S-VOL.
216 CCI command reference for Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
To Next Page
Loading...
