Item Description
You can also click to configure a pair you have
selected in the Available LDEVs table and a pair
you have selected in the Selected Pairs table.
Clear button Click to move the selected S-VOL from the
Selected Pairs table back to the Available LDEVs
table.
Available LDEVs table
The following table lists the items in this table on the Assign Secondary
Volumes window.
Item
Description
LDEV ID The LDEV identification number, which you can specify
as the S-VOL.
LDEV Name The LDEV's name.
Port ID The port name of the LDEV's LUN path.
This item is displayed if you select LUN for Select By.
Host Group Name / iSCSI Target Alias The host group name and ID or iSCSI target alias and
ID of the LDEV's LUN path.
This item is displayed if you select LUN for Select By.
iSCSI Target Name The iSCSI target name.
This item is displayed if you select LUN for Select By.
LUN ID The LUN identification number of the LDEV's LUN path.
This item is displayed if you select LUN for Select By.
Capacity The LDEV's capacity.
CLPR The LDEV's CLPR ID.
Capacity Saving Information about the LDEV's capacity saving function.
• Compression: The compression function is used.
• Deduplication and Compression: The
deduplication function and the compression function
are used.
• Disabled: The capacity saving function is not used.
T10 PI The LDEV's T10 PI attribute information.
• Enabled: The LDEV's T10 PI attribute is enabled.
• Disabled: The LDEV's T10 PI attribute is disabled.
Snapshot Group The snapshot group name.
Information is displayed for this item only if you have
configured a snapshot group for the HTI pair.
Status The pair status.
For more information about pair status, see Thin Image
pair status definitions on page 160.
290 Thin Image GUI windows and wizards
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
To Next Page
Loading...
