raidcom add ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0101 The parity group number or the external group
number is not in the effective range.
Get Command
Status
Async 2E00 1005 Failed to restore the LDEV that is created to
external volume group.
CMDRJE Executing 2E00 6000 The specified pool ID is not in the effective range.
CMDRJE Executing 2E00 7000 The specified CLPR ID is not in the effective range.
CMDRJE Executing 2E00 8301 MP Blade ID is not in the effective range.
CMDRJE Executing 2E02 0201 The specified protection type is not supported.
Get Command
Status
Async 2E02 0203 The specified operation cannot be performed
because it is an external volume.
Get Command
Status
Async 2E02 0204 The operation cannot be performed because the
specified capacity is less than 8 GB.
Get Command
Status
Async 2E02 0205 Full Allocation cannot be performed because the
pool uses the LDEV belonging to a parity group
with accelerated compression enabled.
CMDRJE Executing 2E10 0003 The specified LDEV is used as a Compatible
FlashCopy® V2 relationship.
Get Command
Status
Async 2E10 001F The operation cannot be performed because the
total capacity of virtual volumes for Dynamic
Tiering or active flash in the system exceeds the
maximum.
Get Command
Status
Async 2E10 002D The operation cannot be performed because the
specified LDEV is a journal volume.
Get Command
Status
Async 2E10 005A The operation cannot be performed because the
following information of the migration source and
the migration target does not match.
• serial number
• product ID
• emulation type
• SSID
• LUSE
• CVS configuration
• LDEV number
Get Command
Status
Async 2E10 0064 The specified pool volume is already linked with
the virtual volume having the Data Direct Mapping
attribute.
Get Command
Status
Async 2E10 0100 The volumes cannot be added because the
encryption value of the key number that is set to
encryption ECC is invalid.
9-40
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
