Hitachi WJ200 - Stop Read First!

To Unlock All the Parameters To Set the Motor Current
1
Press ESC to enter programming mode
2
Press ESC until parameter b001 is on the
display of your drive
3
Press the UP key until b037 is reached
4
Then press the SET key to enter the b037
parameter
5
Now you can change the 04 to 00 using the
down key
6
Press the SET key to save the data
Now you have unleashed your WJ200 drive!
1
Press ESC to enter programming mode
2
Press ESC until parameter b001 is on the
display of your drive
3
Press the UP key until b012 is reached
4
Then press the SET key to enter the b012
parameter
5
Now you can set your motor nameplate
current using the UP and Down keys
6
Press the SET key to save the data