Need help?Do you have a question about the Hitachi WJ200 and is the answer not in the manual?
General| Model | WJ200 |
|---|---|
| Cooling Method | Fan cooled |
| Output Frequency | 0-400 Hz |
| Control Method | Sensorless Vector Control (SVC) |
| Overload Capacity | 150% for 60 seconds |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault, Short Circuit |
| Communication | RS-485 (Modbus RTU) |
| Braking Unit | Built-in braking transistor (for some models) |
| Ambient Temperature | -10 to +50°C (14 to 122°F) |
| Enclosure | IP20 |
| Output Current | Varies by model |
| Frequency Range | 0.1-400Hz |
| Power Rating | Varies by model |
| Storage Temperature | -20 to +60°C (-4 to 140°F) |
| Humidity | Less than 95% RH (non-condensing) |
| Altitude | Up to 1000m |
| Input Voltage | 200-240V AC, 380-480V AC |
To Next Page
